3 AXIS MACHINE IS SUITABLE FOR WASHING BRUSH AND FOR FLAT BRUSHES . MACHINE SPEED IS 5-6 HOLE PER SECOND .
Features of 3 axis single hockey brush tufting machine FLAT AND ROUND WIRE ‚
1) ‚ special gripper design for single hockey brush. If the gripper was changed
accordingly, it can produce not only single hockey brush, but also flat surface broom.
2) With PLC (Programmable Logic Controller), the operators can make different brush program
according to his requirement.
3) ‚ With double sets of grippers on working table, in the automatically working condition, they will
take turns to tufting filament into brush block.
Standard Working Area of Working Table X-axis x Y-axis x Z-axis = 350mm x 150mm x 100 Material of Brush Handle Plastic Material of Brush Filaments PP, nylon, copper wire, stainless steel wire, bristle Length of Filaments (Outside Holes) 8mm - 120mm Diameter of Brush Filaments 0.08mm - 1.2mm ‚ Diameter of Holes 3mm - 5mm Colors of Filaments Either single color or two colors Maximum Tufting Speed 5 holes per second Specifications of Machine Body 1.3m x 1.12m x 1.4m Motor (Power System) With step-motor by default; also we could use servo-motor instead, if required by clients. Data Input for Tufting Positions Teaching-type: Operator manually puts tufting head into each hole, one by one, the position of these holes will be saved by computer one by one. By this way, all data for tufting position has been entered and saved.
Digits-type: Operator manually enters digits(coordinates of X/Y axis) for tufting position. ‚ Touchable Screen With 5.4'' touchable monitor controller; interface is in English or other language required by client, operating in dialogue-mode, which is quite simple and easy. ‚ Speed Adjusting ‚ Frequency-conversion stepless-adjustable speed ‚ Qty of Programs Saved ‚ It saves totally ‚ 10 programs for making different brushes. ‚ Gross Weight ‚ Around 450KGS ‚